How to Hard Reset the Samsung I8530 Galaxy Beam to Factory Software

1. With the device switched off, press the Volume Up key together with the Power and Home keys.
2. When the phone vibrates release the Power and Home buttons and continue holding Volume.
3. Scroll down within the Recovery Menu, using the Volume keys and select Wipe Data/Factory Data Reset.
4. Confirm your choice by tapping Home and allow for the next screen to come up.
5. The same as before, select Yes and confirm it with Home.
6. Wait for the process to be complete and follow any additional indications that might pop up on the screen.

An alternative to the previous method is using the hard reset code in order to restore the Galaxy Beam to factory settings. To use this one, do the following:

1. Switch the phone off and remove the SIM card before proceeding.
2. Press the Power key and choose Emergency Call to move further.
3. Enter the code: *2767*3855# and allow your Samsung to reboot.

+

How to install Official Jelly Bean Firmware for Samsung Galaxy S Advance GT-I9070. (Not for GT-I9070P)..

1) Download the firmware from the link in the post.. 

2) Download Odin3 from Here
after download run as administrative.. 

2.a) Download JB fIrmware for your contry HERE  or for INDIA DOWNLOAD  Here

3) Extract the firmware that you downloaded from the link in the post..

4) Turn off the phone, press and hold Volume down+Home+Power button until you get the Download mode. (Press the Volume Up to continue) and then connect it to your computer via USB. (wait until Odin detects you device).

5) In Odin put the extracted firmware under PDA and click on Start..

6) Wait until it finishes and restarts itself.


Note: If your phone is not rooted, you do not need to wipe data and cache. Else after the flashing is complete and the phone restarts, it will go in a boot screen loop. Down worry. Here is how to take care of that:

a) Turn the phone off and then press and hold Volume Up+Home+Power.

b) The phone will go into the stock recovery. Wipe data/Factory reset and Wipe cache.

c) Restart the phone and the phone will go into setup with Russian language as default.

d) From the first screen itself, tap the drop down option and select English from that list and hit next. The rest will be easy to complete (as in adding Google Accounts, etc.)

+